AS NZS 1554.1-2000 structural steel welding part 1 welding of steel structures
|
ID： |
F368994E0B634AD8A3E55E9D11C842CB |
|
文件大小(MB)： |
1.12 |
|
页数： |
103 |
|
文件格式： |
|
|
日期： |
2008-8-4 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
AS/NZS 1554.1:2000,Australian/New Zealand Standard.,Structural steel welding,Part 1: Welding of steel structures,AS/NZS 1554.1,Licensed to Mr Willie Raith - Voest A on 12 Nov 2002. Single user licence only. Storage, distribution or use on network prohibited.,AS/NZS 1554.1:2000,This Joint Australian/New Zealand Standard was prepared by Joint Technical,Committee WD/3, Welding of Structures. It was approved on behalf of the Council,of Standards Australia on 9 June 2000 and on behalf of the Council of Standards,New Zealand on 3 July 2000. It was published on 2 September 2000.,The following interests are represented on Committee WD/3:,Association of Consulting Engineers Australia,Australian Chamber of Commerce and Industry,Australian Industry Group,Australian Institution of Steel Construction,AUSTROADS,Bureau of Steel Manufacturers of Australia,Electricity Supply Association of Australia,Institute of Engineers Australia,New Zealand Heavy Engineering Research Association,New Zealand Non-destructive Testing Association,Steel Reinforcement Institute of Australia,University of Sydney,Welding Technology Institute of Australia,Keeping Standards up-to-date,Standards are living documents which reflect progress in science, technology and,systems. To maintain their currency, all Standards are periodically reviewed, and,new editions are published. Between editions, amendments may be issued.,Standards may also be withdrawn. It is important that readers assure themselves,they are using a current Standard, which should include any amendments which,may have been published since the Standard was purchased.,Detailed information about joint Australian/New Zealand Standards can be found by,visiting the Standards Australia web site at www.standards.com.au or Standards,New Zealand web site at www.standards.co.nz and looking up the relevant Standard,in the on-line catalogue.,Alternatively, both organizations publish an annual printed Catalogue with full,details of all current Standards. For more frequent listings or notification of,revisions, amendments and withdrawals, Standards Australia and Standards New,Zealand offer a number of update options. For information about these services,users should contact their respective national Standards organization.,We also welcome suggestions for improvement in our Standards, and especially,encourage readers to notify us immediately of any apparent inaccuracies or,ambiguities. Please address your comments to the Chief Executive of either,Standards Australia International or Standards New Zealand at the address shown,on the back cover.,This Standard was issued in draft form for comment as DR 98630.,Licensed to Mr Willie Raith - Voest A on 12 Nov 2002. Single user licence only. Storage, distribution or use on network prohibited.,AS/NZS 1554.1:2000,Australian/New Zealand Standard.,Structural steel welding,Part 1: Welding of steel structures,Originated in Australia as AS CA8—1933.,Originated in New Zealand, in part, as NZS 4701:1981 and NZS 4704:1994.,Previous edition AS/NZS 1554.1:1995.,Sixth edition 2000.,COPYRIGHT,. Standards Australia/Standards New Zealand,All rights are reserved. No part of this work may be reproduced or copied in any form or by any,means, electronic or mechanical, including photocopying, without the written permission of the,publisher.,Jointly published by Standards Australia International Ltd, GPO Box 5420, Sydney, NSW 2001,and Standards New Zealand, Private Bag 2439, Wellington 6020,ISBN 0 7337 3483 9,Licensed to Mr Willie Raith - Voest A on 12 Nov 2002. Single user licence only. Storage, distribution or use on network prohibited.,AS/NZS 1554.1:2000 2,PREFACE,This Standard was prepared by the Joint Standards Australia/Standards New Zealand,Committee WD/3, Welding of Structures, to supersede AS/NZS 1554.1—1995,NZS 4701:1981, Metal-arc welding of steel structures, and NZS 4704:1994, Structural steel,welding—Welding of steel structures.,The objective of this Standard is to provide rules for the welding of a wide range of steel,constructions and while it is expected that its main use will be for statically loaded welds, it,applies also to some welds subject to fatigue. Although this Standard has been specifically,prepared for steel structures, it may be usefully applied to machine frames and other types,of steel constructions.,This edition incorporates the following major changes to the 1995 edition, some of which,were included in Amendment 1 to the 1995 edition:,(a) Additions to the following clauses:,1.6 (the Note), 1.7(c), 2.1 (the Note), 4.1.2, 4.4, 4.5.5, 4.5.5.5(c), 4.6.1.1(h), 5.2.2,(last paragraph).,(b) Additions to the following tables……
……